新闻中心 / NEWS
行业新闻
当前位置:网站首页 > 新闻中心 > 行业新闻
  • 周转箱运输过程要注意哪些?
  • 本站编辑:杭州宏展塑料有限公司发布日期:2020-03-09 20:09 浏览次数:

周转箱 在物流运输中的五大注意事项 货物按一定要求成组装在一个标准塑料周转箱上组合成为一个运输单位并便于利用铲车或周转箱升降机进行装卸托运和堆存的一种运输方式。 周转箱运输方式

1.必须符合塑料周转箱积载的规定。

2.以包装件杂货物适宜于周转箱运输,散装裸装超重超长或冷藏货物均不能用周转箱运输。

周转箱提供 

1.由承运人提供,在装货地将货物集装在周转箱上,然后货物与塑料周转箱一起装上运输工具,在卸货地收货人提货时,连同周转箱提走,在规定时间内将空周转箱送回。由货方自备简易周转箱,随同货物一起交收货人。折叠周转箱运输注意事项 1. 必须符合周转箱积载的规定。诸如,同一批货运装载每个塑料周转箱的数量和重量必须一致,不能有多有少。不同收货人和不同货物不能混装在一个周转箱上。周转箱平面应全部装载货物,码齐放平,四边均须平放,四角成90度,顶部保持水平。

除原包装上的头标志外,还必须在周转箱铲车叉臂插入的两侧,加刷周转箱货物的毛重、目的港、周转箱件数和编号标志,每一个塑料周转箱的载货重量不得超过规定的最大毛重量。

2. 对周转箱化货物运费按装货后的周转箱毛重和体积减除周转箱重量和周转箱高度计收,亦即对周转箱本身免收运费。

3. 装载周转箱货物的范围有一定限制,不是所有货物都可用周转箱运输。适宜于周转箱运输的货物以包装件杂货物为限,散装、裸装、超重、超长或冷藏货物均不能作为周转箱运输。性能不同的两种危险货物,绝对不能装在同一周转箱上作为周转箱货运。

4. 货物以塑料周转箱运输时,必须在所有运输单证上注明“周转箱运输字样”。

5. 每一个塑料周转箱货载必须捆扎牢固,具有足够的强度和稳定平衡,既能承受一般海上风险,经受装卸操作和移动,上面又能承受一定的压力。

Five points for attention in the logistics transportation of turnover box: the goods are assembled on a standard plastic turnover box according to certain requirements to form a transportation unit, which is convenient for loading, unloading, shipment and stacking by forklift or turnover box elevator. Transport mode of turnover box

1. It must conform to the regulations of plastic turnover box stowage.

2. Packing miscellaneous goods are suitable for the transport of turnover box, and the transport of overweight and overlong bulk or refrigerated goods cannot be carried in turnover box.

Supply of turnover box

1. Provided by the carrier, the goods shall be packed on the turnover box at the place of loading, and then the goods shall be loaded on the means of transport together with the plastic turnover box. When the consignee at the place of unloading picks up the goods, it shall take them away together with the turnover box and return the empty turnover box within the specified time. The simple turnover box shall be prepared by the consignor and delivered to the consignee together with the goods. Precautions for the transportation of folding turnover box 1. It must comply with the regulations for the accumulation of turnover box. For example, the quantity and weight of each plastic turnover box loaded in the same batch of freight must be the same and cannot be too much or too little. Different consignees and different goods cannot be mixed in one turnover box. The plane of the turnover box shall be fully loaded with goods, and the yards shall be placed at the same time. The four sides shall be placed at the same time, and the four corners shall be 90 degrees, and the top shall be horizontal.

In addition to the head mark on the original package, the gross weight, destination port, number of turnover boxes and number mark must be added on both sides of the forklift arm of the turnover box. The carrying weight of each plastic turnover box shall not exceed the specified maximum gross weight.

2. The freight of the turnover box shall be calculated based on the gross weight and volume of the turnover box after loading minus the weight and height of the turnover box, that is, the freight of the turnover box itself shall be exempted.

3. There are certain restrictions on the scope of goods loaded in turnover boxes. Not all goods can be transported in turnover boxes. The goods suitable for the transport of the turnover box are limited to the miscellaneous packing goods, and the bulk, naked, overweight, overlong or refrigerated goods cannot be transported as the turnover box. Two kinds of dangerous goods with different performance can never be loaded on the same turnover box as a turnover box.

4. When the goods are transported in plastic turnover boxes, the words "turnover box transportation" must be indicated on all transport documents.

5. Each plastic turnover box must be firmly strapped with sufficient strength and stable balance, which can not only bear general marine risks, but also withstand loading and unloading operations and movements, and bear certain pressure on it.